| MODEL |
EGX-30 |
| TABLE SIZE |
|
305 mm (X) x 205 mm (Y) (12 in. x
8-1/16 in.) |
| MAX. OPERATION AREA |
|
305 mm (X) x 205 mm (Y) (12 in. x
8-1/16 in.) |
| FEED RATE |
|
X, Y-axis: Max. 3.0 m (118-1/16
in.)/min. (50 mm (1-15/16 in.)/sec.) |
| MECHANICAL RESOLUTION |
|
0.01 mm (0.000394 in.)/step 0.00125 mm (0.0000492
in.)/step ( micro-step control ) |
| SOFTWARE RESOLUTION |
|
0.01 mm (0.000394 in.)/step |
| DISTANCE ACCURACY |
|
Whichever the greater value of 0.1 mm ( 0.00394
in.) or 0.5% of moving distance |
| RIGHT-ANGLE ACCURACY |
|
1 mm (305 mm) ( 0.0394 in. (12-1/16 in.)) |
| SPINDLE MOTOR |
|
15 W ( DC motor ) |
| REVOLUTION SPEED |
|
5,000 --- 10,000 rpm |
| ENGRAVING TOOL MOUNTING
DIAMETER |
|
3.175 mm (1/8 in.) |
| INTERFACE |
|
Parallel (in compliance with the specification of
Centronics)
Serial (under RS-232C standard) Automatic
switching |
| INSTRUCTION SYSTEM |
|
CAMM-GL II mode2 |
| POWER CONSUMPTION |
|
0.6 A / 117 V 0.4 A / 220 to 230 V 0.4 A / 230 to
240 V |
| ACOUSTIC NOISE LEVEL |
|
Operation mode: 70 dB (A) or less Standby mode:
40 dB (A) or less
(According to ISO 7779) |
| EXTERNAL DIMENSIONS |
|
513 mm (W) x 491 mm (D) x 217 mm (H) (20-1/4
in.(W) x 19-3/8 in.(D) x 8-9/16 in. (H) ) |
| WEIGHT |
|
15.5 kg (34.2 lb.) |
| OPERATION TEMPERATURE |
|
5 to 40 C
(41 to 104 F) |
| OPERATION HUMIDITY |
|
35 to 75% ( no condensation ) |
| ACCESSORIES |
|
Power cord: 1, Dust
collector hose and duct: 1, Engraving cutter: 1, Engraving-tool
holder: 1, Diamond cutter adapter: 1,
Hexagonal screw driver:
1, Spanner: 1, Hexagonal wrench: 1, Test material: 1, Adhesive
sheet for securing material: 1,
Roland Software package CD-ROM:
1, User's manual: 1 |
